Specification:

1.Model No: SPL-100, SPL-200
2.Max metal strip width (mm):100;200
3.Suitable for metal sheet thickness(mm):0.08~0.3
4.Straightening speed(m/min):15
5.Motor specification:0.5HPx4P,1HPx4P
6.Straightening wheel diameter (mm):12
7.Roller quantity: 11/12 (up/down)

Features:
1.It is the updated product of H series straightener specially
  designed for punching super thin products. As we all know,
  coil material can not produce good products without flattening
  and stress relieving treatments; therefore, the performance
  of the straightener is critic in the production process
2.The flattening and the straightening secondary wheels adopt
  imported SUJ2, milling after HRC60° heat treatment
  and starts production after plating the hard chrome to ensure
  the evenness of the chrome layers and the form tolerances of
  each bearing
3.The flattening adjusting adopts the floating four-point
     balancing equipment, with  the dial indicator, which can find
    the leveling point rapidly
4.The transmission wheel adopts the compelled cycling
    immersion oil lubrication to reduce the wheel abrasion and
    be able to work under the high temperature condition for a
    long time
5.Adopts the synchronous transmission structure to transfer
  each leveling roller individually to lower the panel surface
  flatness improving requirement because of the interspaces
  caused by wheels rotating
6.The additional lubricating system prolonged the machine life
  span and enables it to work under the stable condition in long
  time.
7.Due to the differences of the material quality, width and
  thickness, there are no fixed values as the preferences;
  therefore, taking some materials for pilot run before the mass
  production and start the continuous assembly after it reaches
  the standard

Our company can produce per your detail specification request.